Seven Preparations You Should Make Before Using Mariquana Plant.

Growing mariquana is more challenging than you might think, though it has plenty of benefits. The plant will be more like a heavy weed and grow in dry places with less water. The plant needs your help to do its job well and produce much more substantial yields. This post will share seven preparations you should make before growing your mariquana plant to help it yield more fruits.

The following preparation tips will teach you how to prepare your soil, containers, seeds (if any), cuttings, and mulch, as well as how to provide water and sun exposure for your plants. You can grow the plant without following these preparation tips, but it is not recommended since you will only waste your time and energy.

1. Soil Preparation

You must prepare your soil before planting the seeds in it. Mariquana grows fine in any soil type as long as it is well-drained and fertile. If you are using your soil, ensure it has been amended in advance. The soil should have enough organic content and nutrients for the plants to grow healthy.

Your compost will give the best results, although additional compost or a commercial fertilizer will do fine if you don’t have any. It is essential to amend the soil since the mariquana plant will grow for a long time and need all nutrients supplied by the suitable soil. Otherwise, your plants might need to mature properly.

2. Container Preparation

After you have prepared your soil, the next thing you need to do is prepare the containers or pots where you will be growing the mariquana. You can use any container for this; a pot, a grow box, a grow bag, etc. You have to make sure that:

(i) The container has drainage holes at the bottom. This is because mariquana plants do not like sitting in water when growing, and it may cause root rot if excess water accumulates at the bottom of the container. It will also drown if no drainage hole is present at the bottom of your pot.

(ii) The container has enough room for the roots to grow. You can check the size of the container by using a ruler to measure it. However, 3 gallons qt per plant is a recommended size to use. If you use a different container, make sure it is big enough for the plant and its growth.

(iii) The container has proper drainage holes at the bottom. This will allow excess water to drain and not create soggy soil, which could drown your plants.

(iv) The container is made from light-colored wood, plastic, or fiberglass. This allows the sunlight to go through and reach the plant’s leaves. Dark-colored containers, such as metal containers, might hinder light exposure and cause your plant to suffer.

3. Seeds (if any) Preparation

Growing mariquana from weed seeds is not that popular, but if you have access to its seeds, you can use them to grow a new crop quickly. If you want, you can even buy marijuana seeds online. Most people don’t use weed seeds to grow a new crop because they are usually weak strains and might not produce enough fruits like other methods, such as cloning from mother plants or growing mariquana from cuttings.

4. Mariquana Cuttings Preparation

One of the best ways to grow this plant is to use mariquana cuttings. It is famous for commercial growers because cuttings from mature plants can be used to grow new ones like a vine. Furthermore, mariquana has aerial roots, making it easy to attach to almost any kind of surface, including wood lumbers or metal wire. Thus, if you want your plant to grow on something, you don’t have to put it in soil. You can put the cutting anywhere, and it will do its job. Just be sure that the cutting is 3 inches long or longer since this is when the roots start growing.

5. Watering and Drip Irrigation Preparation

You don’t have to worry about watering for the first month since you will see no fruits on the plant. After that, it is time to start watering your mariquana plants regularly so that they can produce fruits later. You can water them when they are still small as long as they do not look like they need to be watered now. Ensure that the soil has enough water; you don’t want your plant to suffer from water deprivation and die or get sick.

This is why it is essential to set up your water so the roots are wet enough. You can use a soil wick on your pot or plants, such as alfalfa or straw, to absorb the water and grow the plant roots. Remember that mariquana plants don’t like sitting in water, even when mature.

6. Mulch Preparation

Mulching is an essential thing to do for mariquana plants, especially in the first year. Mulching will keep the soil moist and provide a suitable environment for the roots of your mariquana plant to grow, mainly because the plant needs good light exposure. To ensure your mariquana plant gets enough light exposure, you can use black plastic or cardboard cut into strips, as long as it will fit under the pot or container. You should always mulch around the plants since this will help prevent weed growth and keep their roots moist. If you don’t put it under them, you may have rotting leaves on your plants from excessive moisture and insufficient sunlight.

There are several things you can use to mulch. You can use grass, pine needles, or sawdust. These kinds of mulches will also contain nitrogen and protein from decomposing wood and will supply the plants with all the nutrients they need. Only use leaves for mulching if possible since it will prevent weed growth and moisture evaporation from the soil surface.

7. Scheduling Your Mariquana Plant’s Watering Schedule

Once you are done with your first year growing mariquana plants, it is time to set up a watering schedule for your mariquana plant. This will help you track when to water your plants and provide an ideal environment for good growth. You need to use a soaker hose or drip irrigation system to ensure your mariquana plant’s roots are not too wet, even during summer. This is because mariquana plants can tolerate soil moisture levels as low as 4 inches above the surface, which is almost underwater for most people.

One way to know when to water your plants is by using a rain gauge or scale. You can go online and find a rain gauge or buy one from Amazon; it will cost less than $5 online, and it is easy to use once you have set it up. With this rain gauge, you can figure out when to water your plants and ensure they are watered at the right time.

Conclusion

So, that’s it. Now you know all the necessary things you need to do to have a healthy mariquana plant. Even if you are new to growing mariquana plants or even an expert, this guide is an excellent way to grow your own and get good results! The first year after planting your plants will be the most challenging part since they will only produce fruits once they grow enough roots. But once they do, then your fruits will be unique! If you want a cheap and easy way of growing mariquana plants but need the right supplies, then there are several places online where you can order them.